The truth is that traditional windows can be quite boring – you’ve seen them a million times and there is nothing new or fresh about them. Sometimes you want to see something different and a little more unique. This is where decorative window film comes in. Whether you go for something subtler or something more abstract, window film can literally transform your home and your windows. When it comes to the architectural sanctity of your home, your windows are a critical element, so why not get a little creative? Here are five DIY decorative window film installation tips for your home.
- Make sure to measure the film accordingly when cutting and placing on your window glass. This is a critical part of installing the film, because if there is a millimeter off, you will certainly be able to notice it. One of the best ways to make sure you have exactly the right measurements is to first measure the windowpane itself. You can then place markers for those measurements on the film, but only before you peel it off its backing.
- Be very careful removing the backing from the film. When it comes to creating decorative windows, you don’t want there to be any inconsistency, because it will be quite obvious. And because light often pours through windows, you will be able to see even the slightest creases. So, you want to make sure that you peel the backing off the film with the utmost care and caution. You also want to make sure there isn’t too much dust around, because it could get stuck in the adhesive of the window film.
- Purchase only the highest quality window films. If you don’t want your windows to look cheap, don’t use cheap window film. The cheaper it is, the worse it will look. So, make sure to do your research when it comes to using a high quality window film. For instance, Imaging Sciences creates a broad array of window films that fit between the panes of your window glass – they also look professional and beautiful when applied.
- Moisten the window to prep the film for placement. Some window films need a little coaxing. One of the best ways to get the film to stick to the window and to find the perfect placement is to place a little bit of water on the glass. You don’t want it to be too moist – just enough so that the film stays in one place and allows you to place it on permanently.
- Trim the edges with a razor blade. A razor blade can be a great tool to use to get rid of the excess film around the edge of the window. Simply cut along the edge and provide an area where you can cleanly remove the surplus film. You don’t want to scrape or tear at the edge, because that could remove more film than you’d like. In the end, removing the excess film will ensure that your windows look beautiful and professionally done.